Vdab200 EverSmooth, Руководство пользователя

Страница: 9 / 15

6
USE
1.
Hold the power button several seconds to melt material onto wick.
2. Your Vdab is now ready for 4-8 draws. To reload, twist tip clockwise
1 /
4
- 1 /
2
turn. Do not overload coil.
3.
The load chamber is empty when tip no longer turns. (See CARE to refill.)
4.
It is best to leave load chamber closed until empty. To extract material
for other uses, heat Vdab for a few seconds, then carefully remove sleeve
from base (see TIP 2). Twist mouth tip to excrete material. Use scoop to
scrape material off load chamber tip.
Twist clockwise