Vdab200 EverSmooth, Руководство пользователя

Страница: 6 / 15

3
1 2 3 4 6 5
LOADING YOUR Vdab200
1.
Disassemble Vdab: Pull SLEEVE 4 off BASE 6 (leave COIL 5 attached
to base). Pull MOUTH TIP
1
off PLUNGER
2
. Fully untwist plunger handle.
Unscrew sleeve from plunger. Pull LOAD CHAMBER 3 from sleeve.
2. Prepare and Load Material: A. Roll
3
/
8
” square of
cold material into a firm ‘cylinder’ and load into LOAD
CHAMBER
3
. Tip: A few minutes in the freezer will
harden material to optimum consistency. B. Use SCOOP
10
to load ewax or essentials that will not roll. The Vdab200 is
not for use with oils.
Load Material into
Load Chamber