VCT Vision Elite Series, Руководство пользователя и инструкция по установке

Страница: 20 / 48

C C
A
A
M
M
E
E
R
R
A
A
S S
E
E
T
T
U
U
P
P
Clicking on the “ Camera Setup ” tab will bring up the following screen:
Camera Select Mode
The options can be set for all the cameras or for the cameras individually. Clicking on “ A ”
will select all. Clicking on the “ Camera Select Mode ” button will select the individual
camera. If you click on “ A ”, it automatically set “ Capture Frame ” and “ Continuous
Recording Frame ” to the average frame size for every camera channel.
If you want to adjust “ Capture Frame ” and “ Continuous Recording Frame ” per each
camera, you should not click “ A ” because it will change every camera’s frame to the default
rate.
Default Setting Mode
Check the “ Enable Camera ” if the selected camera is to be
enabled. This will enable the other options on this screen.
Also, if you selected “
Camera Location ” on the OSD
Mode of the Default Setup page, the name entered in the
“
Installation Location ” box, as shown below, will be
displayed on the video screen while monitoring.
Elite Series – Secure Access Video Surveillance
User Guide and Installation Manual
Page 20 of 48 Pages