VCT Vision Elite Series, Руководство пользователя и инструкция по установке

Страница: 18 / 48

Watch Dog Mode
This is a safety function that helps you avoid being on the status of shutdown when it
occurred.
To select Watch Dog function, click the box and set the time.
Auto Switching Mode
To select Auto Switching Mode, check the “ Enable Auto
Switching ” box, and set the number of seconds for the displayed
video. This can be set from 1 to 255 seconds. The display will
then automatically switch through all the video inputs in
accordance with the screen display selected. For example, if there
are 4 cameras connected, and the display mode is set to one, the
display will switch through the four images every second. This is
the same function as the switch on the main program. This will
also switch the video-out signal on analog TV.
Motion Detection (M/D) Beep Mode
To select the Motion Detection Beep Mode, just click the box. It will automatically generate
an alarm signal when motion is detected.
PTZ Mode
In order to activate the pan/tilt/zoom control, both locally and
remotely, check the “
Enable PTZ ” box. If this box is
selected the PTZ control panel will appear on the main
display screen. If it is not selected, the PTZ control panel will
not be available. You should also select the protocol being
used for PTZ control as well as the PTZ port from the drop-
down menus.
Display Mode
Select between ‘ PAL ’ and ‘ NTSC ’ according to the camera type being used.
Security Check
To select Security Check, check the “ Activate Password
Request ” box. If you also require that shutdown be
controlled by password, check the “ Password on
Shutdown ” box.
If there is no operator activity (either keyboard or mouse) for
the time set in the “
Wait ” box, the password will be required
to access the system.
Elite Series – Secure Access Video Surveillance
User Guide and Installation Manual
Page 18 of 48 Pages