VCS VideoJet 100, Руководство пользователя

Страница: 54 / 118

Configuration with web browser
54
VideoJet 100
Harddisk settings
Basics The VideoJet 100 is available in a version with an integral hard disk.
Only in this version the button
HD Service on the configuration
pages can be activated. The hard disk has a storage capacity of
about 20 GB and can be used for the continuous recording of video
pictures before and after an alarm. You can determine the type,
quality and scope of the recordings using up to 8 programs.
A wide range of other options for planning and managing record-
ings is available to you through the
Harddisk settings configura-
tion page.
Furthermore you can bar access to the VideoJet 100 through the
network during recording, so that the recording is not jeopardised
by other operations.
Necessary
planning When planning and configuring the recording programs you need
to consider the following aspects:
You can define different parameters for different days of the week
so that, for example, a greater volume of recording is done at week-
ends. You can set several start and stop times within the same day,
and at the same time you can vary the volume of recording, and the
type of recording mode to suit the changing needs through the day.
In total you can adapt and use 8 programs whose parameters must
not conflict with each other. First make a rough plan of your total
requirements so that you can avoid any overlaps and conflicts in
selected days and times, or other parameters.
The pictures are recorded continuously until an alarm event occurs.
For continuous recording there are two possibilities open to you:
ring memory (
Ring mode ) or long-time recording ( Time lapse ).