
Chapter 3 MeetingPoint Setup
26
VCON Desktop Systems Installation and Setup Guide
At this point, if the system’s communication lines are connected, you may
start a video meeting and receive incoming video meeting calls.
Conference Panel(MXM Support) and Local Video Window
If you are running MeetingPoint for the first time after installation (or
logging into a different MXM), the Configuration Wizard setup program
appears. This program asks you to enter the information required to run
MeetingPoint from your specific location. For the complete standard setup
procedure, see
“Setting Up The MeetingPoint Configuration” on page 28
MeetingPoint’s default properties are suitable for most video meeting
requirements. If you must change these settings, please consult with your
system administrator or VCON distributor.