VC 16835, Инструкция по монтажу и эксплуатации

Страница: 28 / 48

USER MANUAL
23

Load Default:
If [Load Default] is selected, you can initialize the system to the
ex-factory default. Click “Load Default” and select items to be restored

Load Settings:
Load parameters in the removable storage device to NVR.

Save Settings:
Save the set parameters of user’s NVR to the removable storage
device.

IPC Upgrade
：
IPC can be upgraded by the connected NVR. Decompress IPC
upgrading file and copy *.sw file to nvrupgrade directory and copy to the root directory
of U flash disk, as shown in Picture 4-41—>Insert the U flash disk into USB port of
NVR—>Select the IPC you want to upgrade—>Click Upgrade to start upgrading IPC.
Note
：
Do not take out the USB memory or cut off the power during upgrading. When
the update is done, system will be automatically restarted. After about 5 minutes, the
upgrading will be finished. It is recommended to
load ex-factory default
after upgrading.
The auto maintain function can be effective only when NVR returns back to Preview mode
with no any operation within the set auto maintain time.
4.2.5.1 Events
Go to“Main Menu” → “Advance” → “Events” to enter into the interface shown as
Picture 4-42.
Picture4-42
4.2.6 Shutdown
Go to “Main Menu” → “Shutdown” to enter into the menu interface shown as Picture 4-43.
Shutdown function requires user to login by inputting User Name and Password so
as to shut down or reboot system.

Event Type:
Support three abnormal
types: Disk Full, Disk Error and Video
Loss.

Enable:
Active alarms for abnormal
situations.

Alarm Out:
Enable or disable alarms

Latch Time:
How long the buzzer will
sound when external sensor alarm is
detected (10s, 20s, 40s, 60s).

Show Message:
You can set show
message on the screen when sensor
alarm is detected.

Buzzer:
How long the buzzer will sound
(10s, 20s, 40s, 60s).

Send Email:
Select to send Email to
specified Email address when abnormal
events appear..
Picture 4-41
Picture 4-43