VC 16835, Инструкция по монтажу и эксплуатации

Страница: 24 / 48

USER MANUAL
19
4.2.4 .1System
4.2.4.1.1 General
Go to“Main Menu” → “System” → “General” to enter into the interface shown as Picture
4-31.
Picture 4-31
4.2.4.1.2DST
Go to“Main Menu” → “System” → “General” → “DST”to enter into the interface shown as
Picture 4-32.
Picture 4-32
4.2.4.1.3NTP
Go to“Main Menu” → “System” → “General” → “NTP”to enter into the interface shown
as Picture 4-33.
Enter into the interface shown
as Picture 4-32 to set DST, Time
Offset, Start Time and End Time.

NTP service
: Enable/Disable NTP
function.

Server Address
: Select NTP server
（ time.windows.com, time.nist.gov,
pool.ntp.org
）
.

Time Zone:
Corresponding time
zones for various nations or regions.

Update Time:
Enable NTP function
and save parameters and click
Update Time to calibrate the system
time.

Note:
When NTP function is set to
“Enable”, system will calibrate the
system time at every 00:07:50 and
every start-up.
User maysetDate, Time, Date
Format, Time Format, Language,
Video Format, Menu Timeouts and
Show Wizard in this page.