CMS - Main Menu (Live Mode)
40
1.
For PTZ position setup, you may store up to 256 angles:
Position the angle by using the
PTZ joystick controller, select Preset # and then click
“Set”
to save the changes. After the
first setup, you can adjust the camera to pre-set angle by selecting the Preset # and click
“Go”
.
2.
PTZ OSD Setup
: The majority of the Speed Dome in the current market has OSD preset
value at 95. Please select 95 for preset value, click
and then click
to call
out OSD window.
Note: If you were not able to call out the OSD window, please refer to the manufacturer’s
camera user manual.
3. Using the PTZ joystick on the CMS to operate the OSD window. Click
to enter and
click
to close the OSD window.
Listen
Click the listen icon on a live channel to enable the
Listen
function. Click again to disable the
function. Please make sure the
Audio In
box of this device is checked when you setup this
LAN
Device
. (See Chapter 7 CMS – Setup Menu) for LAN Device setup.
Broadcast
Click the
Broadcast
button to transmit audio to the selected device. Click again to disable the
function. Please make sure the
Audio Out
box of this device is checked when you setup this
LAN
Device
. (See Chapter 7 CMS – Setup Menu) for LAN Device setup.
I/O Device
You could click the icon on the channel you want to control to open the I/O control panel
(See Chapter 7 CMS – I/O Device)
