2. Rotate the lock catch (part #7) to loosen the extension tube (part #6). Then, pull up the extension tube and make sure that the copper
bead bounces into the fixed hole. Rotate the lock catch again to make sure that the extension tube is locked at the desired height.
-
NOTE:
There are two (2) fixed holes for different height options.
3. Remove the screw from the panel permanent seat (part #2). Install the handrails (part #4) with the included screws (part #5). Connect
the cable and install the control panel (part #1) with the included screws (part #3).
of
5 8
6
7
7
4
5
1
3
2