VBrick 7000 Series, Руководство по началу работы

Страница: 45 / 78

VBAdmin
VBrick H.264 Appliance Getting Started Guide 35
entries. If you select and apply invalid settings or mismatched parameters, it will display error
messages in red showing the valid range of values or a description of the conflicting
parameters. When this happens, try again with different values or parameters and press
Apply
.
Figure 13. Edit Mode
If the browser is closed after entering the Edit Mode, editing will not be ended. Therefore, a
second user can't know if the first user has simply forgotten to log off or is still engaged in
editing. After an hour of inactivity, Edit Mode times out, whether the browser is open on the
desktop or closed without ending the Edit session. In VBAdmin, the
Logout
button on the
left side of the menu bar ends editing and logs you out of the application.
Using Apply, Revert, and Default
Depending on screen resolution, it may be necessary to scroll down the page to see additional
information and fields. The
Apply
,
Revert
and
Default
buttons however, are always shown at
the bottom of the page when appropriate. You may also see
Refresh
,
Reset Counters
, and
other buttons depending on what page you are on.
Finish Edit Ends the editing session and displays View mode.
Save Writes all applied changes to flash
memory. If you do not click Save
after editing, any changes you made
are lost if the appliance loses power
or is reset.