VBrick Systems 7000 Series Скачать руководство пользователя страница 67 | Manualshive

Страница: 67 / 85

background image

58

© 2009 VBrick Systems, Inc.

System Information

System Model

Displays the hardware model number of the appliance.

Hardware Revision

XX-YY

.

XX

= Hardware Revision.

YY

= CPU Revision.

Boot Revision

Displays current boot revision.

OS Code Revision

Displays current OS code revision.

Application Code Revision Displays the revision number of the application code running

on the appliance.

Current Operational Mode Indicates the current operational mode of the VBrick. The

following modes are supported:

• Run Mode – Normal operation.
• Diagnostics – User selected mode for running certain

VBrick diagnostics.

• Limited Run Mode – Limited operational mode (not

selectable). Normally occurs if a hardware problem exists
within the VBrick but it can still partially operate.

• Overloaded Mode – Limited operational mode (not

selectable). This mode occurs when the VBrick is
configured to handle more video than its operational
capacity. If this occurs, the VBrick needs to be
reconfigured to reduce the number of streams and/or data
rates. Under this condition, the appliance temporarily
reduces video traffic in order to maintain VBAdmin
functionality.

Temperature

Displays the appliance temperature in Celsius (for example 50º
Celsius = 122º Fahrenheit). A temperature exceeding 72º C
will cause an alarm, a trap, and a log message; if the
temperature drops below 70° C the alarm and trap will clear.
When the temperature exceeds the maximum threshold, the
appliance will reboot and come up in Limited Run Mode;
when the temperature drops to an acceptable level, the
appliance will reboot and come up in normal Run Mode. The
temperature determines the fan speed as follows:

• If temperature > 50º C then fan speed = High.
• If temperature > 30º C then fan speed = Medium.
• If temperature < 30º C then fan speed = Low.

Fan Status

On, Off, Alarm.

Slot ID

Blade Server only. Indicates slot number of blade in server
chassis. Blades are numbered 1–11 from left to right.

Overloaded Count

Provides a count of the number of times the box has entered
the Overloaded Mode.

CPU Utilization (%)

Shows average CPU utilization over the previous 10 seconds.

System Up Time

Total up time since last power cycle.

Total System Up Time

Aggregate up time since customer delivery.

«
...
65
66
67
68
69
...
»

Содержание 7000 Series






















































































Отзывы:

Нет отзывов

Похожие инструкции для 7000 Series

Бренд: Abus Страницы: 60

Бренд: Campbell Страницы: 42

Бренд: T&D Страницы: 122

Бренд: Zonet Страницы: 10

Бренд: Samsung Страницы: 65

Бренд: Netopia Страницы: 38

Бренд: process-informatik Страницы: 8

AT-9424Ts/XP AC

Бренд: Allied Telesis Страницы: 3

LoadMaster 1500

Бренд: KEMP Technologies Страницы: 71

Бренд: Taiwan Commate Computer Inc. Страницы: 29

MasterBus Tanklevel Interface

Бренд: Mastervolt Страницы: 8

Speed Touch 591s

Бренд: Alcatel Страницы: 184

Бренд: Marani Страницы: 39

Бренд: Techroutes Страницы: 20

Бренд: TP-Link Страницы: 131

Бренд: Omron Страницы: 6

Бренд: MiWire Страницы: 24

Бренд: Alcatel-Lucent Страницы: 60

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды