VBox V@Home TV Gateway User Manual
5
. Setting up XTi-VBox TV Gateway using the Web Interface
5.3
. Step 3 – Scan
23
5.3
Step 3
–
Scan
NOTE
:
Step 3 – Scan
includes different options, depending on your XTi-VBox TV Gateway product.
Make sure you follow the instructions pertaining to your product and model.
In this section:
Step 3 – Scan for XTi 3332 Dual Tuner
(page 23)
Step 3 – Scan for XTi 3340/3442
(page 25)
5.3.1
Step 3 – Scan for XTi 3332 Dual Tuner Models
Step 3 – Scan
allows you to review your satellite and transponder settings and perform the scan (Figure 16).
Figure 16: Quick Setup Wizard – Step 3 –Scan: Scan Settings Review page (XTi-3332 model)
1.
Review your scan settings and then perform the scan as explained in Table 9:
Table 9: Quick Setup Wizard – Step 3 –Scan: Scan Settings Review page (XTi-3332 Dual Tuner)
Option
Description
Scan Settings Review
Summarizes your current scan settings.
DVBS2-Tuners
[TunerNumbers]
(Sharethesamefeed)
Lists the names of the tuners that share the same feed from the selected
satellite and transponders (DVBS2):
For XTi 3332 Dual Tuner – Tuners 1 and 2
Satellite
Displays the name of the chosen satellite.
Modify
Click to return to the
Tuners Settings
page to change your settings.
EstimatedTimeforScan
Finish(Minutes)
Calculates how long it should take (in minutes) to complete the scan of the
selected satellite and transponders.
Scan
Performs the scan of the select satellite and transponders.