VBOX XTi-3332, Руководство пользователя

Страница: 8 / 92

VBox V@Home TV Gateway User Manual
‎
1 . Introduction to XTi–VBox TV Gateway
‎
1.2 . About this Guide
2
1.2 About this Guide
This guide includes the basic information you need to quickly setup your XTi device:
1. Front and Rear Panels (page 4) – describes the device’s front and rear panels.
2. XTi-3442-52 Rear Panel
3. XTi-3442-52 Dual Tuner 2T/2C has a rear panel with a single connector (RF3) for either two DVB-T/T2
tuners or
two DVB-C tuners (Figure 5). (See How to switch between DVB-T/T2 and DVB-C Configuration
Paragraph 14.1)
Figure 6: XTi 3442 Dual Tuner (Terrestrial or Cable) – Rear Panel
Diagram 4: XT1 3442 - Dual Tuner 2T/2C: Single Connector for Two DVB-T/T2 or DVB-C Tuners
4. Connecting XTi-VBox TV Gateway to your Home Network (page 9 ) – describes your package
contents, lists the system requirements and explains how to physically connect the device to your
network.
5. Configuring your Router and PC to Use the UPnP Protocol (page11) – explains how to enable UPnP,
in order to access your connected device through Windows Network Places.
6. Setting up XTi-VBox TV Gateway using the Web Interface (page 14) – explains how to use the VBox TV
Gateway Web interface to tune your device to a DVB-S transponder and/or a DVB-T or DVB-C channel.
For detailed information on advanced setup options, see the XTi –VBox TV Gateway User Guide .
Item Description
1
RF3‎ – Connector for 2* Tuner (DVB-T//C)
(See diagram 3 below)
2
12V‎ – power adapter connector
3 ON/OFF
–
Power
button
4 LAN
– RJ45 100 Mb (Ethernet cable) connector
5
USB – USB Connector