Page 3 / 3
180408
Turn on the power at the main fuse or circuit breaker box.
6. Gently grasp the light heads and move them up or down, left or right to
adjust the light coverage area. Keep the light heads 30˚ below horizontal
to avoid water damage and electrical shock (See Fig 2) .
Note: When power is first applied, the light will turn on immediately. Wait for 15 seconds to allow the sensor to
warm up.
Assembly Kit
5852MM (1 SET) For T0414
5853MM (1 SET) For T0415
The following parts are available for re-order if damaged or missing.
Mounting Screw X2
#6/32 X1/2 in
Decorative cover
Fixture Mounting Screw
Mounting Strap
Mounting Screw X2
#10/24 X1/4 in
Wire Connector X3
Fig. 2
A
C
B
A: 9"
B: 6-1/4"
C: 5-3/4"
5-YEAR LIMITED WARRANTY:
All products are warranted to be free of defects in material and workmanship for five (5) years from date of purchase.
This warranty is limited to the correction of any such defect, or the replacement of any such defective item(s), provided
that: (a) we are properly notified and consent to return of the item(s) in question:(b) the item(s) is / are returned with proof
of purchase date; and (c) it is found upon inspection by us that the item(s) is / are defective as noted above. This warranty
does not cover labor costs, consequential damages, nor does it apply to any item(s) that have been improperly installed,
overloaded, altered, or otherwise abused by the customer, its agent(s) or employee(s). Finishes are specially excluded
from the terms of this warranty since they are subject to environmental maintenance deemed beyond our control. Other
than the described obligation, we assume no further liability with respect to the sale or use of our products.We make no
warranty, express or implied, and disclaim any warranty of merchantability or fitness for a particular purpose.
Troubleshooting
---The light does not come on at all:
1. Make sure the wall switch and circuit breaker are on.
2. Make sure the wiring is correct.
Mounting Screw X2
#8/32X1/2 in
