4. Take a glass panel and gently slide the glass panel upward into the notch inside of the metal frame in place,
secure it by pressing the clips from bottom sides. (See Fig.2 & Fig.3) Repeat with other panels.
5. Pull out the outlet wires and the house grounding wire from the outlet box. Make wire connections by using
the wire nuts:
---Connect the black (hot) wire from the fixture to the black (hot) wire from the power source.
---Connect the white (neutral) wire from the fixture to the white (neutral) wire from the power source.
---Attach the fixture grounding wire to the mounting plate with the green grounding screw. Then connect it to
the house grounding wire with a wire nut.
Carefully put the wires back into the outlet box.
6. Attach the back plate to the mounting plate by inserting the headless screws, then secure it with rubber
pads and ball nuts.
CAUTION: With silicone caulking compound, caulk completely around where the back plate meets
with the wall surface to prevent water from seeping into the outlet box.
7. Turn on the power at the main fuse or circuit breaker box.
121121
