ASSEMBLY AND INSTALLATION
INSTRUCTIONS
WARNING: BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUIT
BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE.
NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ AND SAVE THESE INSTRUCTIONS.
T0040
1. Thread two headless screws to the mounting plate, and secure them with four lock nuts (two on each side of
the mounting plate). Adjust the length of the headless screws if necessary.
2. Attach the mounting plate to the outlet box by using two mounting screws.
3. Install bulbs from the front of the metal frame (not included). See relamping label at socket area or packaging
for maximum allowed wattage. (See Fig.1)
Glass Panel
Fig.2
Metal Frame
Fixture
Glass Panel (H)
Bulb Type A Max.100W
(not included)
Back Plate
Clip
Ball Nut (F)
Wire Nut
Mounting Screw (E)
Headless Screw (D)
Mounting Plate (A)
House Grounding Wire
Green Grounding Screw (G)
Fixture Grounding Wire
Wire Nut (C)
Outlet Box
Fixture Wire
Lock Nut (B)
Rubber Pad (I)
Parts:
Photocell
IMPORTANT:
The sensor has an excellent photocell function
to enable the light to turn on at dusk and off at
dawn automatically.
121121
Parts Number (4600MM)
Parts Number (9386SC)
Mounting Screw (E)
Green Grounding
Screw (G)
Lock Nut (B)
Wire Nut (C)
Glass Panel (H) (X3)
Mounting Plate (A)
Headless Screw (D)
Ball Nut (F)
notch
Fig.3
Rubber Pad (I)
Fig.1
