Vax XL Pro V-027U Скачать руководство пользователя страница 11

Страница: 11 / 16

Vax Careline

0870 606 1248

maintenance

first large pulley by lightly placing a finder on top to
guide it.

Return the nozzle cover to the original position (Fig.5/5)

Secure by replacing the two (2) screws.

Remove the screw that holds the brushbar in place
(Fig.5/6).

Tilt cleaner off the carpet. Grasp the brush bar and pull
the right side of its chamber.

Tilt the brushbar down to the ground and remove the
silver cap. Slide the worn brushbar out of the cleaner
(Fig.5/7).

To install a new brushbar. Feed the brushbar through the
opening until the screw plate and screw hole are lined up
(as above) (Fig.5/8).

NOTE: The black cap behind the silver screw plate will
be through the hole.

Replace the silver cap to right side of the brushbar.

Lift the brushbar up and align with the brushbar

chamber. Push the screw plate towards the screw hole
until the flush and replace the screw (Fig.5/9).

Fig.5/5

Fig.5/6

Fig.5/8

Fig.5/9

Fig.5/7

Fig.5/4

V-027U User Guide.qxd:V-027U User Guide 11/3/08 11:46 Page 11

All manuals and user guides at all-guides.com

all-guides.com

Содержание XL Pro V-027U
















