background image

Before you begin cleaning

• 

IMPORTANT:

 Carpets should be dry vacuumed thoroughly 

before washing.

•  Test for colourfastness – Wet a white absorbent cloth with the 

solution. In a small hidden area of your carpet/rugs/upholstery 

gently rub with the dampened cloth. Wait ten minutes and check 

for colour removal or bleed with white paper towel or cloth. If your 

carpet has more than one colour, check all colours.

•  Test your carpet/rugs/upholstery – Run the carpet washer over 

a small hidden area. If no pile distortion occurs continue cleaning.

•  Don’t over saturate your carpets.
•  When using the carpet washer, basic safety precautions should 

always be observed.

• 

IMPORTANT:

 Only use Vax carpet solution. Using other solutions 

may cause excess foaming and may invalidate your warranty.

• 

IMPORTANT: 

The clean water tank should only be fi lled with 

warm water (max 40°C). Filling the clean water tank with 

hot/boiling water may damage your machine and invalidate 

your warranty.

• 

CAUTION:

 This is a powerful carpet washer, before plugging 

in make sure all controls are turned off  also hold carpet washer 

fi rmly when staring and during use.

When cleaning an entire room, move 

furniture out of the area to be cleaned. 

If the furniture is too heavy to move, 

place aluminium foil or wax paper 

under legs. This will prevent wood 

fi nishes from staining your carpet.

Pin up furniture skirts and curtains.

Your dirty water tank is fi tted with a fl oat. When the dirty water tank is full or the fl oorhead is not in contact with the 

carpet the fl oat will shut off  the suction at the fl oor nozzle. You will be able to hear if this has happened as the motor 

noise on the unit will increase. Once the fl oat is activated, empty the dirty water tank if full. If the dirty water tank is

not full then turn off  your machine at the power switch and wait for the fl oat to settle.

Remove clean water tank.

Unscrew the clean water 

tank cap from the top of 

the clean water tank. 

Pour required dose of 

carpet cleaning solution 

(approx. 40ml per 1.0L of 

water) and pour into tank. 

Operating your carpet washer

Using your machine

TIP

Содержание W86-DP-A series

















Отзывы: