CAUTION:
Always switch off and unplug the carpet washer from the electrical outlet before assembling, fi lling and
emptying the clean water tank, emptying the dirt water tank, or before connecting/disconnecting the attachments.
IMPORTANT:
Carpets should be dry vacuumed thoroughly before washing.
CAUTION:
The carpet washer is a very powerful unit. Before plugging the cord into the electrical outlet, make sure
all controls on the unit are turned off . Hold the carpet washer fi rmly when starting and in use.
IMPORTANT:
The motor is equipped with a thermal cut-out. If for any reason the unit should overheat, the
thermostat will automatically turn the unit off . Should this occur, unplug the carpet washer from the electrical outlet
and turn off the switch. Check the hose for blockages.
Clean the fi lters. Allow the unit to cool for approximately one hour. To re-start the machine, plug it into an electrical
outlet and switch it back on.
• The plug may not be fully pushed into the electrical socket.
• Check the fuse in the plug if this needs replacing, always replace with a 13amp fuse.
• Make sure the clean water tank is fi tted securely.
• The clean water tank valve may be stuck, hold the clean water tank over the sink
and press the valve underneath to release.
• Check the power brushes for blockages and clear.
• Check the belt. Go to ‘Replacing the belt or brushbars’.
• The fl oat in the dirty water tank may have been activated. Empty the dirty water
tank wait for the fl oat to settle before re-starting your carpet washer.
• Check the dual spin power brushes for blockages and clear.
• The dirty water tank may not be fi tted correctly, also make sure the lid is
pushed down securely.
• Check the nozzle for blockages and clear.
Solution
Problem
Why won’t my carpet
washer turn on?
Why won’t the solution/
clean water dispense?
Why won’t my carpet
washer pick up?
Why won’t the
brushes spin?
What to do if it goes wrong
Getting in touch
