Vax W85-PP-T Dual Power Pro, Руководство пользователя, Страница: 7 / 20

PLEASE READ ‘LET’S TALK SAFETY’ AT THE BEGINNING BEFORE USE
Getting started
IMPORTANT: Carpets should be dry vacuumed thoroughly before washing. Test for colourfastness - Wet a white absorbent
cloth with the solution. In a small hidden area of your carpet/rugs/upholstery gently rub with the dampened cloth. Wait ten
minutes and check for colour removal or bleed with a white paper towel or cloth. If your carpet has more than one colour,
check all colours. Test your carpet/rugs/upholstery – Run the carpet washer over a small hidden area. If no pile distortion
occurs continue cleaning. When cleaning an entire room, move furniture out of the area to be cleaned. If the furniture cannot
be moved, place aluminium foil or wax paper under the legs. This will prevent wood finishes from staining your carpet. Pin up
furniture skirts and curtains. When using the carpet washer, basic safety precautions should always be observed and don’t
over saturate your carpets. Only use Vax carpet solution. Using other solutions may cause excess foaming and will invalidate
your guarantee. The clean water tank should only be filled with warm water (max 40’C). Filling the clean water tank with hot/
boiling water will damage your machine and invalidate the guarantee. This is a powerful carpet washer, before plugging in
make sure all controls are turned off also hold carpet washer firmly when starting and during use.
Assembling your vacuum cleaner
Stand the base of carpet washer on
the floor in the upright position.
Turn handle lock dial clockwise to
lock in position.
Tilt clean water/solution tank and
line up onto carpet washer.
Push tank back until it clicks
into place.