background image

Let’s talk safety

Do’s

Basic  

safety  

precautions

This carpet washer is intended for household use only and NOT 

for commercial or industrial use.

• Only use the carpet washer indoors and keep the area you’re 

cleaning well lit.

• Keep fingers, hair and loose clothing away from moving parts and 

openings whilst using the carpet washer.

• This appliance can be used by children aged from 8 years 

and above and persons with reduced physical, sensory or mental 

Don’ts

• Don’t leave the carpet washer plugged in when unattended.

• Don’t use this carpet washer if it has been dropped, damaged 

or left outdoors.

• Don’t run over the power cord or use carpet washer if the power 

cord or plug is damaged. Please contact our Customer Care 

Line on: 0330 026 8455 (Mon-Fri: 8:30am to 6:30pm, Sat:  

9:00am to 5:00pm).

• Don’t use the carpet washer to pick up any flammable or 

combustible materials (lighter fluid, petrol, kerosene etc.) or use the 

carpet washer in an area with explosive vapours or liquid.

• Don’t handle the plug or use the carpet washer with wet hands.

• Don’t pull or carry this carpet washer by the power cord.

• Check with the manufacturer of your flooring prior to using the 

carpet washer.

• The clean water tank should be filled with warm water (max 40’C) 

only. Filling the clean water tank with hot or boiling water will 

damage the machine and invalidate the guarantee.

• Always vacuum your carpets thoroughly before using the 

carpet washer.

• Always unplug the carpet washer before carrying out any 

maintenance and before connecting or disconnecting the 

hose/accessories.

• Turn off all controls on the carpet washer before disconnecting 

or connecting the power cord, after use always wrap the power 

cord around the cord clips provided.

• Always replace the fuse in the plug with a British 13amp fuse.

• Always protect the power cable from heated surfaces or near 

open flames.

Содержание W85-PP-T Dual Power Pro





















Отзывы: