5
Vax Careline
0870 606 1248
how to operate
4. How to operate
On/Off Switch
Plug cord into electrical outlet. To turn cleaner ON, push
ON/OFF switch once. To turn cleaner OFF, push switch
again (Fig.4/1).
Brush bar Switch
The cleaner is shipped with the brush bar in the OFF
position. To turn the brush bar ON, step on the pedal (A).
The indicator (B) will show red in the “brush bar on”
window (Fig.4/2).
WARNING:
The brush bar must NOT be rotating
when cleaning hard floors. Switch the brush bar
off to prevent damage to lino, parquet and other hard
flooring.
NOTE:
As a precaution Vax recommends that you
raise the Brush Bar as well as switching it off for use
on lino and hard floorings
Cord Rewind
Grasp the end of the plug and pull to release cord from
cord reel. After desired cord length is reached, the cord
will lock into position.
Pull cord all the way out each time cleaner is used to
avoid heating of cord (Fig.4/3).
NOTE: To prevent cord from whipping, hold plug until
cord is rewound.
Transporting Cleaner
To move your cleaner from room to room, put handle
in upright position, tilt cleaner back on rear wheels and
push forward (Fig.4/4).
Handle Positions
The handle of your cleaner has three positions; upright
for storage and when using cleaning tools; operating
position for general operation on carpet and floors; low
for reaching under low furniture. Step on handle release
lever to lower handle (Fig.4/5).
Fig.4/1
Fig.4/2
Fig.4/4
Fig.4/5
Fig.4/3
A
B
A
1
2
3
!
