WARNING:
Always switch off and unplug the vacuum cleaner from the electrical socket before assembling,
opening or emptying the dirt container, or before connecting/disconnecting the attachments.
CAUTION:
The vacuum cleaner is a very powerful unit. Before plugging the cord into the electrical socket,
make sure the switch is in the ‘off’ position.
IMPORTANT:
If the inlet, hose or telescopic tube is blocked, switch off the vacuum cleaner and remove the
blockage(s) before re-starting the vacuum cleaner.
IMPORTANT:
Vax recommends the use of Residual Current Device Rating of 30mA or less.
IMPORTANT:
It is very important that filters are kept clean to obtain maximum performance from your vacuum
cleaner. Not cleaning and not replacing your filters regularly can reduce the suction power and cause overheating
and permanent damage to the vacuum cleaner.
NOTE:
If the supply cord is damaged it must be replaced by the manufacturer, or a similarly qualified person
in order to avoid hazard, or invalidating the warranty.
IMPORTANT:
The motor is equipped with a thermal cut-out. If for any reason the unit should overheat
(eg. from blocked nozzles, a full dust container or unclean filters), the thermostat will automatically turn off the
switch. Should this occur, unplug the vacuum cleaner from the electrical socket and turn off the switch. Remove
dirt container and empty. Clean filters. Allow the unit to cool for approximately one (1) hour. To re-start, plug into
an electrical socket and switch back on.
DAMAGE TO THE VACUUM CLEANER CAUSED AS A DIRECT RESULT OF NOT ADHERING TO THE GENERAL
SAFETY INFORMATION AND THE INSTRUCTIONS IN THIS USER GUIDE INVALIDATES THE WARRANTY.
PLEASE kEEP INSTRUCTIONS FOR FURTHER USE.
Taking care of your carpets and hard floors
The Performance Floors & All is designed to make vacuuming carpets and hard floors regularly, as effective and
efficient as possible and this user guide will help you get the most out of your machine.
Maintaining your carpets and hard floors will ensure they keep their appearance for longer. You’ve chosen carpets and
hard floors for your home for a reason and Vax will help you take good care of them.
Taking care of your Performance Floors & All
Also inside this guide are instructions on maintaining your new machine, so that it’s always ready when you are to
tackle your carpets and hard floors.
General Safety Information
4
vax.com.au
vax.co.nz