Taking care of your machine
Replacing the hard water filter
Pull to remove the hard
water filter
New filter
(beige/cream colour)
Hard water filter should
be replaced every 3 to 6
months or if discoloured
Remove the water tank
to access the hard
water filter
Taking care of your machine
3-6 Months
IMPORTANT:
Don’t operate the steam mop without hard water filter in place. The condition of the filter affects the
performance of your machine, check and change filter periodically. If you live in an area of hard water the filter will
discolour or darken over time. Depending on water hardness and frequency of use, the filter should be changed every
3 to 6 months or if the filter has discoloured.
If there is an obstruction
to the steam flow through
the machine, steam may be
released through the bleed
valve located on the side of
the handheld
With the pad removed from
the floor head, insert a
small thin object such as
a paper-clip in to the steam
holes to remove a blockage
To remove the floor head
from main body push the
floor head release button
and lift
After floor head is removed,
using a thin object such as
a paper-clip (in the area
shown), insert to remove
the blockage
Removing blockages
