If a minor problem occurs, it can usually be solved quite easily by using the checklist below.
PROBLEM: Wet/Dry vac won’t run
Cause:
Not firmly plugged in
Solution:
Plug unit in firmly.
Cause:
No voltage in wall plug
Solution:
Check fuse or circuit breaker.
Cause:
Blown fuse/tripped circuit breaker
Solution:
Replace fuse/reset circuit breaker.
PROBLEM: loss of suction or air flow
Cause:
Obstruction in hose wand or tool
Solution:
Clear obstruction.
Cause:
Clogged cartridge or foam filter
Solution:
Clean filter as described in ‘Maintenance’.
Cause:
Hose/split in hose
Solution:
Inspect and replace hose.
Cause:
Automatic shut-off engaged
Solution:
See ‘Automatic wet shut-off’ section
11
Troubleshooting/Technical Specification
7. Technical Specification
Power supply:
220-240V/50Hz
Motor power:
1000-
1200W
Capacity
60 litres
Filter system:
Cartridge filter (pleated paper)
Foam filter
Cord length: 7.
1
m
Weight: 11kg
Subject to technical change without notice.
6. Troubleshooting
Vax VO-7000 D7 IL 10/19/04 3:36 PM Page 11