![background image](http://html1.mh-extra.com/html/vax/vmat1400w/vmat1400w_user-manual_4240532008.webp)
Vax Service line:
AU: 1300 361 505
NZ: 0800 800 900
vax.com.au
7
Maintenance
(Keep your Vax as good as new)
IMPORTANT:
Your Vax vacuum cleaner is fitted with high performance filters it is essential that these are
well maintained and cleaned according to the following instructions.
Maintaining the Filters
NOTE:
Do not use any detergents or boiling
water to wash the filters.
Vax recommends that the pre-motor and post-motor filter should be checked and cleaned periodically depending
on the frequency of use and the volume of dirt being picked upon each occasion.
NOTE:
Both Pre- and Post-Motor Filters can be rinsed in warm water (max 40°C). Allow to air dry for 24 hours
before replacing. Do NOT use any detergents or boiling water to wash the filters.
Once completely dry, return the filters and case to the vacuum cleaner. Replace all filters covers before restarting
the vacuum cleaner.
IMPORTANT:
Even with regular cleaning, filters have a limited lifespan and will eventually need to be
replaced during the lifetime of the vacuum cleaner. If the performance of your vacuum cleaner is
compromised and/or the filters are severely discoloured, the filters may need to be replaced. As a general
guide, Vax recommends filters are replaced every 3-6 months depending on the level of use to ensure
optimum performance of your vacuum cleaner.
Cleaning the Pre-Motor Filter