![background image](http://html.mh-extra.com/html/vax/vcsd-04/vcsd-04_user-manual_856454019.webp)
• This will prevent blockages affecting the machines performance and will reduce odour build up.
• It is recommended that the suction hose is cleaned at regular intervals (weekly) or whenever performance is reduced.
• Detach the suction hose from the squeegee.
• Remove the suction hose from the machine via the connection hole in the dirty water tank.
• Wash the hose and remove any blockages.
• After cleaning, securely attach the suction hose to the machine and squeegee.
FAQs
19
Vax Careline: (UK) 0330 026 4275
The machine has no power?
•
The ignition key is not inserted or incorrectly turns.
Insert ignition key and turn clockwise to ‘ON.’
•
The battery connector is disconnected or poorly attached to the battery security connector.
Firmly connect the battery security connector into the port.
•
The machine is not charging before use.
•
The batteries are discharged.
Charge the batteries.
•
The machine has over heated.
Check what may have caused the malfunction (high slope, brush or squeegee blockage). Wait 30 minutes
and try to avoid the same incorrect process. If the problem persists, contact Vax Commercial Careline:
(UK) 0330 0264275.
The machine doesn’t move forward?
•
The power lever is not pressed.
Press the lever.
•
The floor slope is too steep.
Manually push the machine to the new level.
•
The batteries are dead.
Charge the batteries.
•
The power lever was pressed when the machine was turned on.
Release the power lever turn off and restart the machine.
The brushes don’t rotate?
•
The brush motor switch is not selected.
Press the button to activate the brushes.
•
The machine is not moving forward and the brush control has tripped to avoid damaging the floor.
The brushes will only spin when the power lever is pressed and the machine is moving forward.
Press power lever.
No suction?
•
The suction hose is not connected to the squeegee.
Connect it correctly.
•
The suction hose and entry point, the squeegees or the inspection compartment are clogged.
Clean out and remove any obstructions.
•
The suction motor is turned off.
Turn on suction motor on the control panel.
•
The dirty water tank is full.
Empty it.
Insufficient suction?
•
The dirty water tank cover was not correctly fitted.
Refit by hooking the locking clip securely into place.
•
The dirty water tank drain hose cap is not tightly closed.
Tighten the cap.
•
The suction hose and entry point, the squeegees or the inspection compartment are clogged.
Clean out and remove any blockages.
Содержание VCSD-04
Страница 22: ...22 vaxcommercial co uk Notes ...
Страница 23: ...23 Vax Careline UK 0330 026 4275 Notes ...