background image

General Safety Information

2

Vax Service line:   

AU: 1300 361 505 

NZ: 0800 800 900

FOR COMMERCIAL USE ONLY. 

When using the vacuum cleaner, basic safety precautions should 

always be observed, including the following: 
1.  Only use the vacuum cleaner indoors on dry surfaces.
2.   Turn off the vacuum cleaner controls before disconnecting or 

connecting from the mains supply.

3.   Always unplug the vacuum cleaner before connecting or 

disconnecting the vacuum hose and accessories.

4.   Children should be supervised to ensure that they do not play 

with the appliance.

5.   This appliance is not intended for use by persons (including 

children) with reduced physical, sensory or mental capabilities, 

or lack of experience and knowledge, unless they have been 

given supervision or instruction concerning use of the appliance 

by a person responsible for their safety.

6.   Use only as described in this manual. Use only Vax 

recommended attachments.

7.   Do not use the vacuum cleaner if it has been dropped, damaged, 

left outdoors or dropped into water. Do not use the vacuum 

cleaner with a damaged cord or plug.

8.   Do not pull or carry by cord. Do not use the cord as a handle, 

close a door on the cord or pull cord around sharp edges or 

corners. Do not run the vacuum cleaner over the cord. Keep 

the cord away from heated surfaces.

9.   Do not handle the plug or vacuum cleaner with wet hands. 

Do not use outdoors or on wet surfaces.

10.   Do not put any objects into openings. Do not use with any 

openings blocked and do not restrict airflow. Keep all openings 

free of dust, lint, hair or anything that might reduce airflow.

11.   Keep hair, loose clothing, fingers and all parts of the body away 

from openings and moving parts.

12.   Do not vacuum hot coals, cigarette butts, ash, matches or any 

hot, smoking or burning objects.

13.   Do not vacuum flammable or combustible materials (lighter 

fluid, petrol, kerosene etc.) or use in the presence of explosive 

liquids or vapours.

14.   Do not vacuum harmful or toxic material (chlorine, bleach, 

ammonia, drain cleaner etc.).

15.   Do not vacuum plaster dust, concrete dust, or any other 

building or vitreous materials.

16.   Don not vacuum baking soda or any other powder-based 

carpet refresher or deodoriser.

17.   Do not vacuum hard or sharp objects such as glass, nails, 

screws, coins, etc.

18.   Do not use the vacuum cleaner with blocked filters and without 

all the filters and dust bag in place.

19.  Take extra care when vacuuming on stairs.
20. Keep vacuuming area well lit.
21.  Store the vacuum cleaner in a cool, dry area.
22.  Turn off the on/off switch before unplugging the vacuum cleaner.

23.   Use only SAA-approved 10 amp extension cords. Non-approved 

cords may overheat. Care should be taken to arrange the cord 

so that the cord cannot be tripped over.

 WARNING:

 Always switch off and unplug the vacuum 

cleaner from the electrical outlet before assembling, 

opening or emptying the dirt container, or before 

connecting/disconnecting the attachments.

CAUTION:

 The vacuum cleaner is a very powerful unit. 

Before plugging the cord into the electrical outlet, make 

sure the switch is in the ‘off’ position.

 IMPORTANT:

 If the inlet, hose or telescopic tube is 

blocked, switch off the vacuum cleaner and remove the 

blockage(s) before re-starting the vacuum cleaner. 

See Maintenance: Clearing blockages.

 IMPORTANT:

 It is very important that filters are kept clean 

to obtain maximum performance from your vacuum cleaner. 

Not cleaning and not replacing your filters regularly can 

reduce the suction power and cause overheating and 

permanent damage to the vacuum cleaner.

NOTE:

 If the supply cord is damaged it must be replaced 

by the manufacturer, or a similarly qualified person in 

order to avoid a hazard, or invalidating the warranty. 

IMPORTANT:

 Vax recommends the use of a Residual Current 

Device with a Residual Current Rating of 30mA or less.

 IMPORTANT:

 The motor is equipped with a thermal 

cut-out. If for any reason the unit should overheat, the 

thermostat will automatically turn the unit off. Should this 

occur, unplug the vacuum cleaner from the electrical outlet 

and turn off the switch. Remove dirt container and empty. 

Clean filters. Allow the unit to cool for approximately one 

(1) hour. To re-start, plug into an electrical outlet and 

switch back on.

DAMAGE TO THE VACUUM CLEANER CAUSED AS A DIRECT 

RESULT OF NOT ADHERING TO THE GENERAL SAFETY 

INFORMATION AND INSTRUCTIONS IN THIS USER GUIDE 

INVALIDATES THE WARRANTY.

This machine is intended for commercial use. 
PLEASE KEEP THESE INSTRUCTIONS FOR FURTHER USE.

!
!

!
!

!
!

!
!

!
!

!
!

!
!

!
!

!
!

!
!

!
!

!
!

!
!

!
!

Содержание VCC-08













Отзывы: