14
15
1
2
3
How to operate your cleaner
Caution:
DO NOT turn the soap
switch ON without solution in the
tank. DO NOT allow the solution
tank to run dry.
Plug the cord into an electrical
socket. Step on the handle release
pedal to put the cleaner into a
cleaning position.
Turn main power switch and soap
switch to the ON position
4
How to operate your cleaner
Burst clean feature
To spray cleaning solution, depress
the solution release trigger (3a) and
move the cleaner backward and
forward. Release the trigger and
push the unit back and forth in the
same track to remove dirty water
and solution from the carpet.
For heavily soiled areas, repeat if
necessary.
N.B
The brushbar starts rotating
automatically when the machine is
reclined.
To rinse your carpet, turn the soap
switch to the OFF position. Repeat
the same process (as in step 3)
The burst clean switch is located on
the side of the machine and
illuminates when turned on. This
feature increases the brushbar
speed and pump flow rate to tackle
more stubborn stains and high
traffic areas. Switch off to wash
carpets as normal.
1
1
How to carry your cleaner
Grab the carrying handle on the
back of the cleaner to transport from
room to room.
Do not pick the cleaner up by the
clean water tank handle.
3a
Turn
on
Turn
off
V027(Y) User Guide 5/10/06 11:47 am Page 7
