5
operation / accessories
Window attachment
- Push the window attachment
onto the rectangular steam nozzle until you hear it click
into place. You can fit the window attachment to the
concentration nozzle by pushing it into place.
Perfect for cleaning windows, mirrors, ceramic tiles and
surfaces and other non-porous, smooth surfaces.
Apply the steam evenly to the glass surface from a
distance of about 20cm. Switch the steam off and wipe
the moisture off the glass top to bottom in strips using
the rubber squeegee. Wipe the rubber squeegee and the
lower edge of the window dry after every strip.
WARNING:
Glass surfaces can be shattered by the
sudden application of excessive heat. Before
cleaning such glass surfaces with the steam
cleaner. warm them up by applying steam to the surface
from a distance of 20-25cm. Continue by applying steam
from a distance of 10-15cm.
4. How to Operate
Over-heating protection
The steamer is equipped with protection against over-
heating. The cleaner will switch itself off automatically
on reaching a temperature of 180˚C, in order to prevent
over-heating. In this event, please remove the plug from
the socket immediately. Allow the cleaner to cool down
for 30 minutes before resuming work.
Filling the water tank
Always ensure that the plug of the steamer is removed
from the socket before filling or refilling the cleaner with
water. Remove the cover of the water tank by pressing it
down and turning it anti-clockwise. Fill the tank with 1.4L
of water using the measuring beaker. Replace the cover
and close it tightly by turning in the clockwise direction.
The water tank should be emptied after use. Allow the
inside of the water tank to dry out before replacing the
cover.
If the water tank needs to be refilled during use, first
switch the cleaner off and remove the plug from the
socket. Before opening the tank cover to refill the tank,
release the steam switch on the steam gun or allow the
cleaner to cool down completely.
WARNING:
Even after a cooling period of 5
minutes, the remaining water in the tank and the
tank cover locking screw will still be hot. Always take care
when removing the tank cover locking screw, since hot
steam may be emitted and the thread can still cause
burns. The filler opening of the cleaner must never be
opened during use (CONTAINER UNDER PRESSURE).
WARNING:
Never fill the tank with anything but
cold water. The use of any other fluids can be
dangerous, and can lead to damage of the heating
element.
Vax Careline
: (UK) 0844 412 8455
(ROI) 1-800 928 308
!
!
!
!
!
!
!
!
!
!
!
!
water
All manuals and user guides at all-guides.com
