7
Vax Careline
0870 606 1248
maintenance / troubleshooting
Rotate the brush while pulling it in and out of the chamber.
Insert the steam nozzle back into the chamber and turn it
clockwise to lock back into position.
N.B Vax recommends cleaning the chamber after
every 12-15 uses to ensure optimum performance.
Unblocking the Steam Outlet
If steam flow appears reduced, the steam nozzle may be
blocked.
Insert the nozzle pin into the centre of the steam nozzle.
This will clear any blockage that may have formed.
Cleaning the Cloths
Both the floor and utility tool cloths can be machine
washed (60ºC max). For heavy soiling, soak the cloths in
warm water and detergent or a mild stain remover. Allow
to dry completely before storing.
7. Troubleshooting
WARNING: To reduce the risk of personal injury,
unplug the steam cleaner before servicing.
PROBLEM: Steam cleaner has no power
Cause:
Steam cleaner is not properly plugged into an
electrical outlet or is not switched on.
Solution:
Insert the plug into an electrical outlet and
switch the steam cleaner on.
Cause:
The socket is faulty.
Solution:
Check the socket by unplugging the steam
cleaner and plugging in a different appliance.
Cause:
The power cable is damaged.
Solution:
Have the cable replaced by a Vax Service Agent.
PROBLEM: No steam is emitted when the steam
cleaner is on.
Cause:
The water tank is empty.
Solution:
Top up with water.
Cause:
The steam nozzle is blocked.
Solution:
Refer to section 6.
Cause:
Despite the green light, the steam switch is
not activated properly.
Solution:
Press down the steam switch fully.
Cause:
The weighted tubing inside the tank is not in
the correct (immersed) position.
Solution:
Shake the steam cleaner gently.
PROBLEM: Only a very small amount of steam flows
out of the steam cleaner.
Cause:
The steam regulator is set to minimum.
Solution:
Turn the steam controller until sufficient
steam is emitted.
!
Vax V-083(Q) User Guide.qxd 25/1/07 11:11 Page 7
