7
Operating the Vac ‘n’ Mop
Vacuum
Mop
To turn the vacuum on:
Push the on/off button down
(a).
To lock the vacuum on:
Slide the lock button forward
(b)
.
Pull back with the thumb to unlock.
To dispense the solution:
Pull the trigger on the back of the handle
(c)
.
For best results, clean one small area at a time. Spray the solution by holding the
trigger down for 3-4 seconds. This will dispense enough solution to clean approx 1
square yard. Mop as you normally would, using the absorbent cleaning pad.
NOTE:
For tough spots and stains, spray the solution directly on to the spot or stain. Allow
the solution to soak for a few minutes, then mop with an absorbent cleaning pad.
10
11
c
b
a
