www.vax.co.uk
6
operation/ dirty water tank
IMPORTANT
: Do not overwork any area of carpet,
as this may damage carpet fibres.
Depress the spray trigger to spray solution onto the area.
Allow the cleaning solution to penetrate stain for 2
minutes (Fig.3/13).
Turn the Vacuum/Scrub selector to ‘Scrub’ and use the
rotating scrub brush on the area in a forward and
backward motion, using steady strokes (Fig.3/14).
Turn the Vacuum/Scrub selector back to ‘Vacuum’ to pick-
up the remaining moisture (Fig.3/15).
4. Emptying & cleaning the dirty
water tank
NOTE
: Do NOT remove the dirty water tank with the unit
in the upright position. You should empty the tank when
the dirty water in the tank reaches the ‘Full’ line on the
dirty water tank, or, when the float shuts off airflow, this
will be indicated by a change in the pitch of the motor
and reduced suction. Finally, you should also empty the
dirty water tank after use and rinse clean, before storage.
With one hand hold the cleaner by the handle, with the
other grasp the sides of the dirty water tanks and push
the latch to release (Fig.4/1).
Grasp and pull the cleaner UP and AWAY from the dirty
water tank (Fig.4/2).
Unscrew the dirty water tank drain cap (Fig.4/3).
!
Fig.3/13
Fig.4/1
Fig.4/2
Fig.3/14
Fig.3/15
Vax V-035B Infinity User Guide.qxd:V-035B Infinity UG 20/10/08 17:22 Page 6
