![background image](http://html1.mh-extra.com/html/vax/v-028/v-028_instruction-manual_4220703008.webp)
How to Operate/Carpet Cleaning
8
Fill measuring cap with solution (approximately
4 capfuls). Pour into clean water tank.
NOTE:
Use only Vax AAA Carpet Cleaner solution.
Using other cleaning solutions may cause excess
foaming. Excessive foam will cause the float to shut off
the carpet washer prematurely. Using other solutions
will void the warranty.
Fill remainder of clean water tank with warm (max
40ºC) tap water. Replace cap.
7. Carpet Cleaning
Place bottom of clean water tank into carpet washer
and rotate top into position until the clean water tank
Latch snaps into place.
Fig.7/1
Fig.7/3
Fig.7/2
Plug cord into electrical socket. Step on the power on/off
pedal to turn cleaner on.
NOTE
: Never leave unit unattended with power on. Turn
off when emptying and filling tanks. Do not oversaturate
the carpet.
Step onto handle release pedal to put into cleaning
position.
Fig.7/4
Fig.7/5
While depressing solution spray trigger, pull carpet
washer in backward motion. Release trigger and push
unit forward in same path to remove dirty water and
solution from carpet. (For heavily soiled areas, repeat
if necessary).
Vax V-028 Range.qxd 27/4/07 13:26 Page 8