www.vax.co.uk
4
assembly
3. Assembly
Putting your cleaner together
Remove your Rapide XL from the carton with caution.
The handle is connected to the body by a cord (Fig.3/1).
NOTE: Do not tug or pull on the cord.
Line up the handle to the upper body of the machine and
slide into place (Fig.3/2).
NOTE: Phillips screwdriver required
Secure from the back with the two smaller screws
(Fig.3/3).
Feed the cord through the slots on the back of the
handle and push into place (Fig.3/4).
Place a nut into the recess in the back of the upper
handle. While holding the nut in place insert one of the
large screws through the front of the upper handle and
tighten (Fig.3/5).
Repeat the process with the second screw.
Remove the backing tape from the screw cover and press
into place (Fig.3/6).
Fig.3/1
Fig.3/4
Fig.3/5
Fig.3/2
Fig.3/6
Fig.3/3