vax.co.uk
4
assembly
3. How to Assemble
IMPORTANT: Always remove the power plug
from the electrical outlet before assembling or
removing accessories.
Handle Assembly
Firmly push the back panel onto the base assembly. Ensure
it is fully located before inserting the two short screws
(Fig.3/1).
Slide the handle into place onto the top of the back panel.
Secure the top handle to the back panel by inserting the
two long screws (Fig.3/2).
Assembling the Dirt Container
Insert the bottom of the dirt container to align with the
tab on the upper cover of the motor. To secure the dirt
container, push the top in place, there will be an audible
click when it is secure (Fig.3/3).
Assembly of the Hose
Align the tabs on the lower hose/inspection tube with the
slots on the hose. Push and turn the hose clockwise until
secure (Fig.3/4).
Wrap the hose round and through the hose clip and then
down and insert into hose connector (Fig.3/5).
Cord Storage
This vacuum cleaner is equipped with a convenient cord
storage feature. The power cord winds around the two
cord holders at the side of the unit. The bottom cord holder
has a quick release feature. Turn the cord hook to the left
or the right to remove the power cord (Fig.3/6).
!
Fig.3/1
Fig.3/4
Fig.3/5
Fig.3/6
Fig.3/2
Line up here
Fig.3/3
V-044B Infinity By Vax User Guide.qxd:V-044B Infinity User Guide 18/6/09 16:04 Page 4
