www.vax.co.uk
4
how to assemble / how to operate
3. How to assemble
Handle Assembly
Slide wand into slot until you hear a click. Insert screws
into holes indicated (Fig.3/1).
Tool Storage
Attach tools: (a) Slide the upholstery tool onto the caddy
above the hose connector and slide the TurboTool onto
the caddy on the other side. (b) Clip the dusting brush and
crevice tool into the holsters below the TurboTool.
(Fig.3/2). (c) Clip Turbo Tool onto the side of the
cleaner (Fig.3/2).
4. How to operate
Cord release
Turn Upper Cord Release for easy cord removal (Fig.4/1).
Carpet height adjuster
Turn the carpet height adjuster knob to match the
surface being cleaned (Fig.4/2).
IMPORTANT: For easiest adjustment, place
cleaner in full upright position.
On/Off Switch
Plug cord into electrical outlet. Turn cleaner on by
pressing the on/off button located above the TurboTool
caddy.
Handle Release Pedal
To release handle, push the handle release pedal located
on the lower left side of the cleaner (Fig.4/3).
CAUTION: Brushbar continues to rotate while
hose is removed or in use and at all times
while cleaner is on. Keep hair, loose clothing, fingers,
and all parts of body away from brush area while
cleaner is on. Cleaner must be in the upright position
to lift the rotating brush off the carpet when
cleaning above the floor.
Fig.3/2
Fig.4/1
Fig.4/2
Fig.4/3
!
!
Cord Release
Height
adjuster
Fig.3/1
Vax VZL 101 User Guide.qxd 4/10/07 09:03 Page 4
