4
assembly
3. How to Assemble
IMPORTANT: Always remove the power plug
from the electrical outlet before assembling or
removing accessories.
Handle Assembly
Firmly push the back panel onto the base assembly.
Ensure it is fully located before inserting the two short
screws (Fig.3/1).
Slide the handle into place onto the top of the back panel.
Secure the handle to the back panel by inserting the two
long screws (Fig.3/2).
Assembling the Dirt Container
Insert the bottom of the dirt container to align with the
tab on the upper cover of the motor. To secure the dirt
container, push the top in place, there will be an audible
click when it is secure (Fig.3/3).
Assembly of the Hose
Align the tabs on the lower hose/inspection tube with
the slots on the hose. Push and turn the hose clockwise
until secure (Fig.3/4).
Wrap the hose round and through the hose clip and then
down and insert into hose connector (Fig.3/5).
Cord Storage
This vacuum cleaner is equipped with a convenient cord
storage feature. The power cord winds around the two
cord holders at the side of the unit. The bottom cord
holder has a quick release feature. Turn the cord hook to
the left or the right to remove the power cord (Fig.3/6).
!
Fig.3/1
Fig.3/4
Fig.3/5
Fig.3/6
Fig.3/2
Line up here
Fig.3/3
vax.co.uk
U89 U90 & U91-P2 Power 2 Series User Guide V2.0:U90-P2 User Guide 13/08/2010 11:44 Page 4
