Removing blockages
WARNING:
To reduce the risk of electric shock, turn the vacuum cleaner off and unplug from the electrical
socket before performing maintenance/troubleshooting checks. Disconnect the hose from the vacuum
cleaner and remove any blockages found then reconnect the hose securely.
!
Replacing the brushbar belt
vax.co.uk
9
Maintenance
(Keep your Vax as good as new)
Unscrew the 4 screws
from the base of the unit
using a crosshead
screwdriver.
Remove floor nozzle cover. Lift brushbar and remove
belt from the end of the
brushbar.
Squeeze tabs to remover
dial cover.
Pull dial towards you.
Clean and remove any
debris from inside.
Remove lower hose and
check for blockages.
Removing blockages from the TurboTool
(some models only)
Locking ring
Tabs
Turn the TurboTool over and slide
off the locking ring.
Detach lower housing and
remove blockage.
To re-assemble the TurboTool, ensure
that the tabs are engaged and pivot the
lower housing closed. Slip the locking
ring over the neck of the TurboTool and
into the groove to finish.
U88-T4-P User Guide v1.0 [J316]_User guide 20/04/2012 14:57 Page 9
All manuals and user guides at all-guides.com