Push the hose into the
hose clips on the machine.
Wrap the power cord around
the quick release cord hook
and the lower cord hook,
continue wrapping the power
cord until it is secure.
Assembling your upright
Twist the quick release
cord hook to release the
power cord.
Plug in the machine.
Press the power on/off
button to turn on.
Place your foot gently
onto the floorhead and
pull the handle back to
recline the machine.
Before you begin cleaning
• Always switch off and unplug the vacuum cleaner before connecting or disconnecting the hose/attachments,
or removing and emptying the dirt container.
• The vacuum cleaner is equipped with a thermal cut-out. If for any reason the vacuum cleaner does overheat the
thermostat will automatically turn the vacuum cleaner off. If this happens, switch the vacuum cleaner off and unplug
from electrical socket. Remove and empty the dirt container also check the vacuum cleaner for blockages. Allow the
vacuum cleaner to cool for approximately 1 hour (if you have cleaned the filters please wait 24 hours for the filters
to fully dry before putting back into the vacuum).
• For best cleaning results filters require cleaning at least every 3 months.
• If the vacuum cleaner is blocked, switch off and unplug before removing the blockage.
• When using the accessories always make sure the brushbar is switched to the off position.
Getting started
Using your machine
PLEASE READ ‘LET’S TALK SAFETY’ AT THE BEGINNING BEFORE USE
Place the dirt
container onto the
main body and click
into position.
Align the main body
with the floor head
and push into place.
Push the hose into
the hose to handle
connector and twist to
lock into position.
Insert the extension
tube into the top of
the main body and
click into place.
To release the handle with
extension tube press the
extension tube release
button and lift the handle
to remove.
Using the floorhead without the main body
To remove the main body:
Hold the dirt container
handle, press the main
body release button and lift
to remove.
Put the main body to one
side, use floorhead for
difficult to reach places.
Press extension tube
release button and lift the
handle to remove.
Press handle release
button, pull extension tube
to remove.
U86-PF-P_Performance_Floors&All_UG_[J2214]_Comp_31.12.13.indd 6-7
31/12/2013 14:22