Vax Steam CDHF-SGXS, Руководство пользователя

Страница: 17 / 20

17
WHAT TO DO IF IT GOES WRONG
WARNING:
Always switch off and unplug the machine before performing any maintenance or troubleshooting checks.
• The plug may not be fully pushed into the electrical socket.
• The fuse in the plug may need replacing. Always replace with a British 13amp fuse.
• Check the on/off control dial position.
See Cleaning hard floors page 10.
• Check the red light is illuminated. See Cleaning hard floors page 10.
• The microfibre pad may already be saturated or dirty. Wash the microfibre pad. See Cleaning the microfibre pad page 15.
Why won't the machine turn on?
• Check the contents on the box to make sure the part is definitely included with your machine.
There is an accessory missing
Why won't the machine produce steam?
Why wont the microfibre pad pick up dirt?
• There may be no or little water in water tank. Check the water tank has water.
See Filling the water tank page 9.
• Check the water tank cap is securely fitted onto the water tank.
See Filling the water tank page 9.
• The water may not yet be at temperature. The machine will take approximately 30 seconds to heat up.
See Cleaning hard floors page 10.
• The steam dial may be set to low.
See Cleaning hard floors page 10.
• The steam path may be blocked.
See Clearing blockages page 16.
• If using as a stick mop - the handle may not be fully inserted. Release the handle and press the handheld trigger to check steam
is working. Re-insert the handle until it clicks into place.
• If using as a handheld - the ball in the water tank may be stuck. Tilt the machine to release the ball.