Vax Steam CDHF-SGXS, Руководство пользователя

Страница: 10 / 20

10
USING YOUR MACHINE
Place foot onto the
floorhead and pull the
handle backwards to recline.
Cleaning hard floors
IMPORTANT: Never use the floorhead without a microfibre pad attached. Never leave the machine on one spot for an
extended period of time or with a damp or wet microfibre pad attached as this may damage the floor surface.
Place the microfibre pad on
the floor white side facing
up. Place the floorhead onto
the microfibre pad making
sure the microfibre pad
covers the entire floorhead.
Twist the steam control dial
to the desired setting. Steam
is activated automatically.
Move the machine slowly
backwards and forwards
across the floor paying
particular attention to high
traffic areas.
Push the handle into the
main body until it clicks
into place.
Push the main body down
into the floorhead until it
clicks into place.
Plug into the mains and
turn the dial to 'ON'.
The red light will illuminate.
The machine will be ready
after approximately 30
seconds. During this time
there will be no sound
whilst it is heating up.
Turn the dial to ‘OFF’
position and allow the
machine to cool. The red
light will switch off.
Hold the corner of the pad
down with your foot and lift
the machine to peel away.