Getting Started
Operating your steam cleaner
6
CAUTION:
The nozzle gets very hot during use. Always switch off the steamer before emptying the water tank or changing the
cleaning accessories.
Do not open the water tank lid when using the steamer. The steamer is pressurised, do not remove lid when the tank is hot.
Fill tank only when cool.
IMPORTANT:
Please refer to surface manufacturer’s care recommendations before use and test the steamer on an hidden area
of surface to begin with. Test for colour fastness in a small hidden area of upholstery/fabric to check for colour removal
before use.
When using the steamer, basic safety precautions should always be observed.
Don’t aim the steamer at people, animals, plants and electrical components such as interior of ovens or wires.
Never touch the steam jet from a short distance (there is a risk of scalding).
The steamer is equipped with a thermostat and a thermal cut-out.
If for any reason the steamer overheats it will switch off.
If this happens turn off and unplug the steamer, allow to cool for a least 2 to 4 hours Don’t use hot or boiling water
to fill clean water tank.
Before you begin
1
2
3
NOTE:
Do not over
fill. (x1 jug only)
Place steamer on a level surface.
Push down and twist water tank screw
cap anti-clockwise to remove.
Push down and twist water tank screw
cap clockwise, until tightly fitted.
Plug into mains.
Fill measuring jug with maximum 260ml
of water.
Slowly pour water into water tank,
allowing space at the top.
S4 Grime Master User Guide v1.2- 28.02.13_User guide 02/09/2014 10:36 Page 6