5
Vax Careline
0870 606 1248
assembly / before cleaning
Twist cord holder until it is facing upwards (Fig 3/9).
Finally insert clean water tank and machine is fully
assembled (Fig 3/10).
4. Before cleaning
IMPORTANT: Do not use the carpet washer as a
dry vacuum.
1.
Vacuum carpet thoroughly. Use a vacuum cleaner
with a revolving brushbar for best results.
2.
Remove as much furniture from the room as
possible. If unable to remove the furniture, place
plastic or foil under and around the legs until the
carpet has dried completely.
Helpful hints for cleaning carpet:
1.
Only use Vax AAA Carpet Cleaner with this carpet
washer.
2.
Do not oversaturate carpet with cleaning solution
while using the carpet washer.
3.
For heavily soiled areas, additional applications may
be necessary.
4.
Allow plenty of time to dry carpet thoroughly.
5.
Wipe cleaning solution from woodwork and wood to
prevent any damage.
6.
Try not to walk on carpet until it is completely dry.
7.
After carpet is thoroughly dry, vacuum the carpet
using a vacuum cleaner with a revolving brushbar.
8.
Before cleaning, determine where to start and end,
making sure not to walk over previously cleaned
areas.
Check for colour fastness:
Before cleaning carpet, test for colour fastness. Dampen
a white cloth with solution. Test a small area in a closet.
Gently rub the cloth over the area. Check each colour for
colour bleeding. If the cloth remains clean, it should be
safe to clean the carpet.
After cleaning:
•
Allow carpet to dry completely. Try not to walk on
the carpet until it is dry.
•
If it is necessary to walk on the carpet, place white
towels on the areas to be walked on.
•
If the carpet is not dry and the furniture must be
placed back in the room, use plastic or foil under the
furniture to prevent staining the carpet.
•
Thoroughly clean the dirty water tank with warm
(max 40ºC) tap water.
Fig.3/8
Fig.3/9
Fig.3/9
!
Insert Screw
Insert Screw
Insert Screw
All manuals and user guides at all-guides.com
