www.vax.co.uk
6
operation
Emptying and Cleaning the Dirty Water Tank
WARNING:
To reduce risk of electric shock or injury,
unplug before removing tank(s) and remove tanks
from unit before emptying.
When to empty:
• Dirty water reaches the “full” line on the dirty water tank
• Float shuts off airflow, indicated by a change in pitch of
the motor and reduced suction
• At the end of each use, prior to storage
Turn ON/OFF switch to the OFF position. Unplug power cord
from outlet. Press down on the Lid. Release Latch and tilt
towards the front of cleaner to access the tanks (Fig 4/4).
Remove Clean and Dirty Water Tank assembly by pulling up
and out of cleaner and separate Dirty Water Tank (Fig 4/5).
Open Dirty Water Tank plug and empty contents into sink
(Fig.4/7). Rinse thoroughly with clean water (Fig.4/7a).
!
Fig.4/5
Fig.4/6
Fig.4/7
Lid release latch
Fig.4/7a
Vax V-033 User Guide.qxd:Vax V-033 User Guide 3/9/08 16:46 Page 6
All manuals and user guides at all-guides.com
all-guides.com
