Getting started
Preparing for use
Always check the laundry care label and adjust the temperature and steam accordingly for the type of fabric.
Test on a hidden area to begin with.
The spray burst will
moisten the fabric to help
remove stubborn creases.
The steam boost function
can be used to iron in the
vertical position to remove
creases from hanging
clothes and curtains.
The steam boost function can only be used at
temperature settings between
and Max
to help remove stubborn creases.
Press and release the
spray burst button.
Press and release the
steam boost button.
Stand the iron in the
upright position on a heat
resistant levelled surface.
Select to the required
temperature setting.
Select the required steam
setting. Make sure the
steam setting selected is
suitable for the ironing
temperature.
Plug into mains. The
heater indicator light will
illuminate red to show that
the power is on and the
unit is heating. When the
selected temperature has
been reached the light will
turn green to indicate the
unit is ready to use.
Features
Using your appliance
IMPORTANT:
The Automatic shut-off switches off the iron if it has been stood in the upright position for 8
minutes and 30 seconds when facing in a downward position and not been moved for an extended period of time.
The iron will beep and the heater indicator light will constantly flash. Gently shake the iron to re-use, the heater
indicator light will illuminate red when heating up, the light will turn green when temperature has been reached
and it’s ready to use.
Fabric type
Temperature setting
Steam setting
Steam boost
Spray burst
Cotton/linen
Adjustable
Yes
Optional
Silk/wool
N/A
No
Optional
Synthetics
N/A
No
Optional
Spray burst
Vertical steam boost
Steam boost
The anti-drip function
stops drops of water
falling onto your
clothes when ironing
at low temperature.
Anti-drip
