Assembling your appliance
IMPORTANT:
Remove all the packaging covering the appliance.
The wheel plates should only be fitted between the outer fins of the radiator with the ‘U’ shaped wheel plate fitted
on the side nearest the control panel.
Turn the radiator upside
down on a carpet or
soft surface to avoid
any damage.
Tilt the wheel plate and
guide the curved end
of the clamp through
and over the hole.
Make sure it securely
hooks into place.
Turn and stand the appliance in the upright position.
Allow the oil to re-disperse and settle.
Unscrew and remove the
wing nut from the clamp
and hook the clamp around
the outer edge of the fin,
nearest the control panel.
Push the other end of the
clamp through the second
hole and tighten securely
into position using the
wing nut.
Line up the ‘U’ shaped
wheel plate making sure
the castor wheels face out
towards the control panel.
Repeat the process for
the (straight) second
wheel plate. Attach
to the outer fin on
the opposite side
of the radiator.
Getting started
Содержание PowerHeat ACH1V101
Страница 1: ...ACH1V101 PowerHeat 1500W LET S GET STARTED...