• Check the contents on the back of the box to make sure the part is
included with your vacuum cleaner.
• The plug may not be fully pushed into the electrical socket.
• Check the fuse in the plug. If this needs replacing, always replace with
a British 13amp fuse.
• The motor thermostat may have tripped. If this has happened, unplug
the vacuum cleaner. Remove and empty the dirt container and check the
hose for blockages. Clean the filters and allow the vacuum cleaner to cool
for approximately 1 hour. Go to ‘Taking care of your machine’.
• The brushbar may be clogged, check the brushbar and clear any
hair or debris. Go to ‘Let’s talk technical’.
• The belt might be broken. Go to ‘Let’s talk technical’.
• There may be a blockage in the hose. Remove the hose from the vacuum
cleaner, check and clear any blockages. Go to ‘Let’s talk technical’,
• Empty the dirt container and clean filters. Go to the ‘Taking care of your
machine’ page.
• The brushbar may not be turning. Go to ‘The brushbar isn’t turning’ below.
• The brushbar height adjuster dial may not be set to the correct setting.
Go to ‘Using your machine’.
• If the accessory/tool will not pick up, check and clear any blockages.
Go to ‘Let’s talk technical’.
• Make sure the hard floor adaptor is attached/unattached dependent
on the floor surface.
Solution
Problem
There is an
accessory missing.
Why does my vacuum
cleaner have no power?
Why won’t the vacuum
cleaner pick up?
The brushbar
isn’t turning.
What to do if it goes wrong
Содержание PowerCompact UCNBPCP1
Страница 1: ...UCNBPCP1 UCNBPCH1 UCNBPCC1 LET S GET STARTED CYCLONIC BAGLESS UPRIGHT VACUUM PowerCompact...
Страница 18: ...Notes...
Страница 19: ...Notes...