11
Maintenance
(Keep your Vax as good as new)
GB
Clearing blockages
!
Hose blockages
The flexible hose may be disconnected
from the vacuum cleaner. Carefully remove
any blockages found and reconnect the
hose securely.
Lay the Turbobrush on a flat surface and turn over to expose the
brushbar. Using a pair of scissors, cut through any threads or hairs
caught by the brushbar that have wrapped around the guides.
Accessory blockages
Remove accessory from the hose/telescopic tube.
Carefully remove the blockage and return to the
cleaner.
Turn the TurboTool over and
slide off the locking ring.
Detach lower housing and
remove blockage.
To re-assemble the TurboTool,
ensure that the tabs are engaged
and pivot the lower housing
closed. Slip the locking ring over
the neck of the TurboTool and into
the groove to finish.
Locking ring
WARNING:
To reduce the risk of electric shock, the power cord must be disconnected before performing
maintenance/troubleshooting checks. Turn the vacuum cleaner off and unplug from the electrical socket
Removing blockages from the TurboTool
(some models only)
Removing blockages from the Turbobrush
(some models only)
Tabs
Содержание POWER 6 C89-P6 Series
Страница 2: ...2 ...